Calgaz Calibration Gas Cylinder – Full Set

Calgaz Calibration Gas Cylinder – Full Set

Eastern Sea Co,. Ltd – The Calgaz’s Official Distributor in Vietnam presents full set of Calibration gas cylinder:
– Calibration gas cylinder 2.5% CH4 Balance Air;
– 715 Regulator;
– Hard Carrying Case (capacity: 02 cylinders);
– Recycle Kit.

I. Calibration Gas Cylinder 6D 103 Liters 2.5% CH4 Balance Air

Specification
● Model: Calgaz 103s – 6D
● Mixtures: 2.5% CH4 Balance Air
● Contains: 103 liters
● Weight: 3 lb (1.4kg)
● Cylinder Material: Aluminum
● Type of Gas: Non – Reactive Single
● Pressure: 1000 psig/69 bar
● Height & Dimension: 13.875″ x 3.25″ (356 mm x 83 mm)
● Regulator Capacity: Model 715, DFR 2000 Series, hoặc 4000 Series “Trigger” regulators.
● Shelf Life: 36 months.

II. 715 Model Regulator for Calibration Gas Cylinder

General
● 715 Model Regulator
● Extracting the gas from Calibration Gas Cylinder for calibrating gas detectors/ laboratory istruments.
Specification:
● Model: 715 Regulator
● Flow Rate: 0.5 LPM
● Maximum Pressure Inlet : 0-1000 psig/ 70 bar
● Pressure : 3″ H₂O/ 5.6mm Hg
● Inlet : 5/8-18 UNF
● Outlet : 3/16″ Barb/4.8mm
● Pressure Gauge : 0-1000 psig/70bar
● Used for : Calgaz 34, Calgaz 58, Calgaz 116, Calgaz 103s
Construction
● Body : Brass
● Seat & Seals : Teflon® & Viton®
● Piston : Brass
● Washer : Buna N (2007 only)
● Diaphragm : Buna N (PVC 2004 & 2006)
● Bonnet : Aluminum
III. 574 Hard Carrying Case

● Dimension: 23” x 9”; Opening: 15”
● Warranty: 12 months
● Used for: Calgaz 34, Calgaz 34s, Calgaz 58, Calgaz 58s, Calgaz 103s.
● Contain: Case with integral foam block

IV. Recycle Kit – Model RXC 4250

● Weight: 0.45 kg
● Warranty: 24 months
● Used for: Calgaz 34 ,Calgaz 58 , Calgaz 103s , Calgaz 116.
● Included: Recycle Kit & Introduction.

For more information, please contact
Eastern Sea Co,. Ltd
72 Pham Ngoc Thach, Ward 9, Vung Tau City, Vietnam
Tel: (+84) 2543. 573.537
Hotline: (+84) 986.53.59.59
Email: esc@easternsea.com.vn
Website: easternsea.com.vn –binhkhihieuchuan.easternsea.com.vn